Containers – Unipak

Skip to content

Take-Away Containers

- CTR-1C
  Catering Tray / Lid
- D750W
  Container / Lid 2 Compartments
- DS750W
  Container/Lid 2 Compartments
- FF10
  Container / Lid 300 ml
- FF1000
  Container / Lid 950 ml
- FF12
  Container / Lid 350 ml
- FF16
  Container / Lid 420 ml
- FF20
  Container / Lid 530 ml
- FF225
  Container / Lid 230 ml
- FF25
  Container / Lid 620 ml
- FF30
  Container / Lid 720 ml
- FF4
  Container / Lid 100 ml
- FF500
  Container / Lid 560 ml
- FF650
  Container / Lid 700 ml
- FF750
  Container / Lid 800 ml
- FFSQ250
  Container / Lid 250 ml
- FFSQ450
  Container / Lid 450 ml
- FFSQ650
  Container / Lid 650 ml
- L1300W
  Container Elongated 1300 ml
- PSC100
  Container with Lid 30 ml
- QC1200W
  Container/Lid 4 Compartments
- RC12
  Container/Lid 350 ml
- RC16
  Container/Lid 420 ml
- RC2
  Container / Lid 50 ml
- RC6
  Container / Lid 150 ml
- RC8
  Container/Lid 190 ml
- RD1000B
  Container / Lid 840 ml
- RD2300
  Container/Lid 2075 ml
- RD750
  Container/Lid 750 ml
- RD750B
  Container / Lid 710 ml
- SD-4-TR
  Chili Dish
- SD-8-WH
  Chili Dish Big
- SL750-RD
  Container / Lid 750 ml
- SL750-TR
  Container/Lid with Handle 750 ml
- SQ1
  Container / Lid 1060 ml
- SQ1500
  Container / Lid 1440 ml
- SQ5
  Container / Lid 2270 ml
- SW2
  Container / Lid 200 ml
- SW8
  Container / Lid 1050 ml
- TC1200W
  Container / Lid 3 Compartments
- TC1300W
  Container / Lid 3 Compartments
- TCC50
  Container with Lid 50 ml
- W1.5
  Container / Lid 175 ml
- W1
  Container / Lid 150 ml

For exact prices provide the quantity you intend to order. Contact us about additional discounts for bulk orders or product customisation.

Pattern 01

Ice-Blue

Pattern 01

Blue-Gold

Pattern 01

Red-Gold

Pattern 01

Sakura

Pattern 01

Momiji

Pattern 01

Pattern 26

Pattern 01

Pattern 24

Pattern 01

Pattern 21

Pattern 01

Pattern 23

Pattern 01

Pattern 20

Pattern 01

Pattern 13

Pattern 01

Pattern 10

Pattern 01

Pattern 06

Pattern 01

Pattern 02

Pattern 01

Pattern 01

PLA – polylactic acid

Thermoplastic polyester obtained by condensation or polymerisation of lactic acid. The lactic acid monomer is obtained from fermented plant starch (corn, sugarcane, etc.). Mechanical properties range from soft and elastic to stiff and high strength. Heat-resistant, non-toxic, biodegradable.

PVC – polyvinyl chloride

Polymer made from vinyl chloride monomers by polymerization. Polyvinyl chloride is a heavy, stiff, ductile, medium strong, amorphous, transparent material. Excellent resistance to chemicals (acids and bases), grease, and oil.

BOPS – biaxially oriented polystyrene

Formed by stretching a polystyrene film in two different directions. Increases transparency, and also stiffness.

OPS – oriented polystyrene

Aromatic polymer made from styrene monomers by polymerization. Produced by stretching extruded polystyrene film, improving visibility through the material by reducing haziness and increasing stiffness. Clear, hard, and brittle with a relatively low melting point.

PS – polystyrene

Aromatic polymer made from styrene monomers by polymerization. Clear, hard, and brittle with a relatively low melting point. Foaming produces an opaque, rigid, lightweight material with impact protection and thermal insulation properties.
OPS: Oriented polystyrene
BOPS: Biaxially oriented polystyrene

PP – polypropylene

Polyolefin made from propylene, a gaseous hydrocarbon, using catalysts. Harder, denser, more heat-resistant, and more transparent than polyethylene.

HDPE – high density polyethylene

Polyolefin made from ethylene, a gaseous hydrocarbon, using catalysts. Stiff, strong, tough, resistant to chemicals and moisture, permeable to gas, easy to process, and easy to form.

LDPE – low density polyethylene

Polyolefin made from ethylene, a gaseous hydrocarbon, using catalysts. Flexible, strong, tough, easy to seal, and resistant to moisture, relatively transparent.

PE – polyethylene

Polyolefin made from ethylene, a gaseous hydrocarbon, using catalysts.
Classified by density:
LDPE: flexible, strong, tough, easy to seal, and resistant to moisture, relatively transparent.
HDPE: stiff, strong, tough, resistant to chemicals and moisture, permeable to gas, easy to process, and easy to form.

PC – polycarbonate

Polyester containing carbonate groups, made from bisphenol A and phosgene. Clear, heat resistant, and durable. Harsh cleaning detergents catalyze the release of bisphenol A and are a potential health hazard.

PET – polyethylene terephthalate

Polyester made from ethylene glycol and dimethyl terephthalate or terephthalic acid. Good gas and moisture barrier, good resistance to heat, mineral oils, solvents, and to acids, but not to bases. Glass-like transparency, light weight, shatter resistant.